Green-based modifiable CaZnBr4 for solar cells application

Autor: Moses E. Emetere, Oluwaseyi O. Bello
Jazyk: angličtina
Rok vydání: 2023
Předmět:
Zdroj: Materials for Renewable and Sustainable Energy, Vol 12, Iss 3, Pp 219-234 (2023)
Druh dokumentu: article
ISSN: 2194-1459
2194-1467
DOI: 10.1007/s40243-023-00242-7
Popis: Abstract Future revolution in photovoltaics will be hinged mainly on cost, health implication, and material stability and performance. Based on these criteria, lead-based inorganic photovoltaics, organic–inorganic hybrid, and silicon photovoltaics are screened-out. According to the literature, the lead-free inorganic perovskite solar cell is favorably disposed to cost and safe-health. However, the simultaneous solution to material stability, high defect density, and low power conversion efficiency (PCE) still remains a mystery that has not been solved. This research proposed the green-based modifiable CaZnBr4 as a potential candidate for lead-free solar cell application based on the principle of A-site cation with green-based additive incorporation. The green-based additive was obtained from Kola Nitida, Carica Papaya, Ficus Exasperata, and Musa paradisiaca. The elemental characterization of the green-based additives was performed using X-ray fluorescence spectroscopy (XRF). The optical, crystalline, and electronic properties were characterized using ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffractometry, Quantum Espresso, scanning electron microscopy and SCAPS-1D. The green-base-modified CaZnBr4 showed significant PCE improvement by 3% with significant film and crystallinity formation. The stressed state of the parent compound CaZnBr4 shows that it may be better suited for thermovoltaics application. It is recommended that better results could be obtained when different synthetic routes and green-based additives are used to initiate the defect passivation protocols.
Databáze: Directory of Open Access Journals
Externí odkaz: