| Autor: |
Al-Tameemi Haider Ali, Al-Katib Haider A. A., Alkhudery Hayder H. |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Open Engineering, Vol 14, Iss 1, Pp 58-82 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2391-5439 |
| DOI: |
10.1515/eng-2022-0494 |
| Popis: |
Strengthening the carpentry joints is considered a big challenge for designers to maintain the joined timber elements’ load transfer and integrity. This research work investigates different techniques to strengthen the lap joints in glulam timber beams using carbon fiber-reinforced polymer (CFRP) sheets. For this purpose, 12 specimens of glulam timber beams were tested using the four-point loading method. One of the glulam timber specimens was an intact nonlapped specimen, and the others were lapped at mid-span using half-height lap joints. The lap joints were strengthened using different configurations of the CFRP sheets. The test variables were the clamping scheme, bond length, and reinforcement ratio of the CFRP sheets. The analysis of the test results indicates that the CFRP strengthening configuration could be more effective in strengthening the lapped glulam timber beams when the reinforcement ratio of the longitudinal CFRP sheets was equal to 0.303%, and the wrapping CFRP sheets continued beyond the lapped joint by a distance equal to the beam height. Such a strengthening configuration could succeed in increasing the effective stiffness and ultimate load of the lapped timber specimen to 109 and 110%, respectively, relative to those of the intact nonlapped specimen. Moreover, the results reveal that increasing the length or the reinforcement ratio of the longitudinal CFRP sheets without increasing the width of the wrapping CFRP sheets could not succeed in achieving the required improvements in the structural behavior of the lapped timber beams. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
