Autor: |
D. Rozumek, S. Faszynka |
Jazyk: |
angličtina |
Rok vydání: |
2017 |
Předmět: |
|
Zdroj: |
Frattura ed Integrità Strutturale, Vol 11, Iss 42, Pp 23-29 (2017) |
Druh dokumentu: |
article |
ISSN: |
1971-8993 |
DOI: |
10.3221/IGF-ESIS.42.3 |
Popis: |
The paper presents the results of tests on the fatigue crack growth for a constant moment amplitude under combined bending with torsion in the aluminium alloy AW-2017A-T4. The tests were performed under different values of the load ratio R. Plane specimens with stress concentrators in form of the external one-sided sharp notch were tested. A non-uniform fatigue cracks growth on both lateral surfaces of specimens was observed during experimental tests. Fatigue cracks were developing in the specimens in two stages; quarter-elliptic edge cracks were observed at the beginning, then evolving into through cracks |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|