Predicting of Roll Surface Re-Machining Using Artificial Neural Network
| Autor: | Miha Kovačič, Andrej Mihevc, Milan Terčelj, Uroš Župerl |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Tehnički Glasnik, Vol 16, Iss 2, Pp 219-226 (2022) |
| Druh dokumentu: | article |
| ISSN: | 1846-6168 1848-5588 |
| DOI: | 10.31803/tg-20220325193331 |
| Popis: | The paper presents a model for predicting the roll wear in the hot rolling process. It includes all indicators from the entire continuous rolling line that best predict the roll wear in the hot rolling process. Data for model development were obtained from annual production on the first rolling stand of the continuous roll mill. The main goal of the research was to determine significant parameters that affect the wear of the roll in the process of hot rolling. It has been found that the amount of rolled material before the re-machining of the roll surface has the greatest impact on the life of the roll contour. Therefore, the amount of material rolled before re-machining of the roll was used to estimate the wear of the roll. An artificial neural network was used to predict this amount of rolled material and was validated using data from one-year production. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|