Potentiometric Sensor with High Capacity Composite Composed of Ruthenium Dioxide and Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate
| Autor: | Nikola Lenar, Robert Piech, Beata Paczosa-Bator |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
high electrical capacity
stable potentiometric response nanocomposite mediation layers conducting polymer poly(3 4-ethylenedioxythiophene) polystyrene sulfonate ruthenium dioxide Technology Electrical engineering. Electronics. Nuclear engineering TK1-9971 Engineering (General). Civil engineering (General) TA1-2040 Microscopy QH201-278.5 Descriptive and experimental mechanics QC120-168.85 |
| Zdroj: | Materials, Vol 14, Iss 8, p 1891 (2021) |
| Druh dokumentu: | article |
| ISSN: | 1996-1944 02044641 |
| DOI: | 10.3390/ma14081891 |
| Popis: | This work presents the first-time application of the ruthenium dioxide–poly(3,4-ethylenedioxythiophene) polystyrene sulfonate high-capacity composite material as a mediation layer in potassium selective electrodes, which turned out to significantly enhance the electrical and analytical parameters of the electrodes. The idea was to combine the properties of two different types of materials: a conducting polymer, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate, and a metal oxide, ruthenium dioxide, in order to obtain the material for a solid-contact layer of great electrical and physicochemical parameters. The preparation method for composite material proposed in this work is fast and easy. The mediation layer material was examined using a scanning electron microscope and chronopotentiometry in order to confirm that all requirements for mediation layers materials were fulfilled. Ruthenium dioxide–poly(3,4-ethylenedioxythiophene) polystyrene sulfonate nancomposite material turned out to exhibit remarkably high electrical capacitance (of approximately 17.5 mF), which ensured great performance of designed K+-selective sensors. Electrodes of electrical capacity equal to 7.2 mF turned out to exhibit fast and stable (with only 0.077 mV potential change per hour) potentiometric responses in the wide range of potassium ion concentrations (10−6 M to 10−1 M). The electrical capacity of ruthenium dioxide–poly(3,4-ethylenedioxythiophene) polystyrene sulfonate-contacted electrodes characterized by electrical capacitance parameters was the highest reported so far for this type of sensor. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|
| Nepřihlášeným uživatelům se plný text nezobrazuje | K zobrazení výsledku je třeba se přihlásit. |