| Autor: |
M. El-Shennawy, H. A. Abdel-Aleem, M. M. Ghanem, A. M. Sehsah |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Scientific Reports, Vol 14, Iss 1, Pp 1-18 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2045-2322 |
| DOI: |
10.1038/s41598-024-70050-0 |
| Popis: |
Abstract Problems associated with dissimilar fusion welding are mainly originated from the differences in melting points, coefficients of thermal conductivity and thermal expansion, …etc., and carbon content when welding dissimilar ferrous materials. In this study, the problems associated with dissimilar fusion welding of stainless steel AISI304 with ductile cast iron DCI grade A536 were investigated. Using shielded metal arc welding (SMAW) process, various welding parameters were studied to investigate the successful/accepted dissimilar welded joint(s). Welding electrodes and welding techniques were the main studied parameters. Microstructural and mechanical investigations were carried out for welded joints under different welding parameters. Tensile, impact and hardness tests coupled with optical and scanning electron microscopic examinations with EDX analysis were made for metallurgical and mechanical evaluations of welded joints. This extensive study could solve the problem of dissimilar welding between ductile cast iron and 304 stainless steel. The main results showed that joints welded by ENiCrFe-3 electrode in root pass and ENiFe-CI in filling passes were the successful dissimilar welded joints with 422 MPa tensile strength which represents 104% of annealed DCI base metal and without any changes in toughness properties, where toughness at HAZ of DCI was 18 J. High Ni content in weld metal increased the strength, ductility and reduced the weld metal dilution. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
