Effects of the Geometric Parameters of Mixer on the Mixing Process of Foam Concrete Mixture and Its Energy Efficiency
| Autor: | Sergey A. Stel’makh, Evgenii M. Shcherban’, Anatolii I. Shuiskii, Al’bert Yu. Prokopov, Sergey M. Madatyan, Ivan A. Parinov, Alexander V. Cherpakov |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | Applied Sciences, Vol 10, Iss 22, p 8055 (2020) |
| Druh dokumentu: | article |
| ISSN: | 10228055 2076-3417 |
| DOI: | 10.3390/app10228055 |
| Popis: | The paper studies the influence of the geometric parameters of the mixer on the mixing process, the construction of the mixing body, its location in the mixer bulk, and the mixer shape and geometry. The technique of calculating the power spent on mixing the foam concrete mixture is described. The effects of the ratio of the mixture height to the mixer diameter, the number and width of reflective partitions, and the shape of the conical part of the mixer on the homogeneity of the foam concrete mixture and the power consumption are considered. The optimal ratios of the foam concrete mixture height to the mixer diameter have been determined. Moreover, the optimal range of the ratios of the partition width to the mixer diameter has been established, in order to obtain a homogeneous foam concrete mixture throughout the volume with lower energy consumption. The optimal values of the angle of the mixer conical part for the preparation of a foam concrete mixture have been determined. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|