| Autor: |
Mahmoud Shaban, Abdulrahman I. Alateyah, Mohammed F. Alsharekh, Majed O. Alawad, Amal BaQais, Mokhtar Kamel, Fahad Nasser Alsunaydih, Waleed H. El-Garaihy, Hanadi G. Salem |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Journal of Manufacturing and Materials Processing, Vol 7, Iss 2, p 52 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2504-4494 |
| DOI: |
10.3390/jmmp7020052 |
| Popis: |
Several physics-based models have been utilized in material design for the simulation and prediction of material properties. In this study, several machine-learning (ML) approaches were used to construct a prediction model to analyze the influence of equal-channel angular pressing (ECAP) parameters on the microstructural, corrosion and mechanical behavior of the biodegradable magnesium alloy ZK30. The ML approaches employed were linear regression, the Gaussian process, and support vector regression. For the optimization of the alloy’s performance, experiments were conducted on ZK30 billets using different ECAP routes, channel angles, and number of passes. The adopted ML model is an adequate predictive model which agreed with the experimental results. ECAP die angles had an insignificant effect on grain refinement, compared to the route type. ECAP via four passes of route Bc (rotating the sample 90° on its longitudinal axis after each pass in the same direction) was the most effective condition producing homogenous ultrafine grain distribution of 1.92 µm. Processing via 4-Bc and 90° die angle produced the highest hardness (97-HV) coupled with the highest tensile strength (344 MPa). The optimum corrosion rate of 0.140 mils penetration per year (mpy) and the optimum corrosion resistance of 1101 Ω·cm2 resulted from processing through 1-pass using the 120°-die. Grain refinement resulted in reducing the corrosion rates and increased corrosion resistance, which agreed with the ML findings. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
