Locally Reinforcement TiC-Fe Type Produced in Situ in Castings
| Autor: | Olejnik E., Szymański Ł., Kurtyka P., Tokarski T., Maziarz W., Grabowska B., Czapla P. |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Archives of Foundry Engineering, Vol 16, Iss 3, Pp 77-82 (2016) |
| Druh dokumentu: | article |
| ISSN: | 2299-2944 2016-0054 |
| DOI: | 10.1515/afe-2016-0054 |
| Popis: | Refinement is one of the most energy consuming technological process, aimed at obtaining mineral raw materials of the proper grain size. Cast structural elements such as jaws or hammers in crushing machines operate under conditions of an intensive wear. The data indicate that 80 % of failures of machines and devices is caused by wearing of rubbing surfaces. This problem became the subject of several scientific and industrial investigations carried out in the whole world in order to produce materials ultra- wear resistant. Methods allowing to obtain wear resistant composite castings are discussed in the hereby paper. Within the performed research microstructures of the produced composite zones were presented and the comparative analysis with regard to mechanical and functional properties of local composite reinforcements in relation to the commercial alloys of increased wear resistance was performed. The results show almost twenty five times increase in wear resistance compared to manganese cast steel containing 18 % Mn. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|