Development of controlled solid-state alignment for alnico permanent magnets in near-final shape
| Autor: | Iver E. Anderson, Aaron G. Kassen, Emma M. H. White, Andriy Palasyuk, Lin Zhou, Wei Tang, Matthew J. Kramer |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | AIP Advances, Vol 7, Iss 5, Pp 056209-056209-7 (2017) |
| Druh dokumentu: | article |
| ISSN: | 2158-3226 06290159 |
| DOI: | 10.1063/1.4973843 |
| Popis: | The 2011 price shock in the rare earth (RE) permanent magnet (PM) marketplace precipitated realization of extremely poor RE supply diversity and drove renewed research in RE-free permanent magnets such as “alnico.” Essentially, alnico is an Al-Ni-Co-Fe alloy with high magnetic saturation and TC, but low coercivity. It also was last researched extensively in the 1970’s. Currently alnico “9” magnets with the highest energy product (10MGOe) are manufactured by directional solidification to make highly aligned anisotropic magnets. This work developed novel powder processing techniques to improve on unaligned anisotropic alnico “8H” with elevated coercivity. Gas atomization was used to produce pre-alloyed powder for binder-assisted compression molding of near-final shape magnets that were vacuum sintered to full density (250g) showed reduced overall loop squareness compared to unaligned (equiaxed) 8H due to grain rotation-induced misalignment, while low stresses improved squareness and greatly improved alignment compared to equiaxed magnets, with squareness approaching 0.30 and remanence ratio as high as 0.79. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|