Design and performance analysis of manchester coder-based body channel communication using FPGA

Autor: Vijayalakshmi S, Paramasivam A, Nagarajan Velmurugan, Kudiyarasan Swamynathan, Kamatchi S, Hasheetha Jayashankar
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: e-Prime: Advances in Electrical Engineering, Electronics and Energy, Vol 9, Iss , Pp 100660- (2024)
Druh dokumentu: article
ISSN: 2772-6711
DOI: 10.1016/j.prime.2024.100660
Popis: In general, the Body Channel Communication (BCC) is used to transmit human physiological signals over vast distances. Also, the Error-correcting codes can detect and rectify faults in long-range data transmission. Data is encoded in a predetermined manner for secure transmission. In this paper, a Manchester encoding-based high throughput architecture is proposed for a body channel communication system with a low-power operation mode. Further, the Manchester encoder is designed for high throughput performance with a low complexity architecture, and an analog front-end processing circuit which includes two stage pre-amplifiers. Also, the transmission rate on the BCC transceiver side is boosted by the maximum Consecutive Identical Digit (CID), which is limited by Manchester codes. The Manchester code format is generated by encoding the sensed data. Additionally, a full gain buffer is used to reduce data loss and hardware overhead. Results demonstrate that the suggested Manchester encoder is implemented in 90 nano meter (nm) technology, and the 10 Megabits per second (Mbps) data rate is obtained with a configurable operating frequency ranging from 1 to 100 Megahertz (MHz).
Databáze: Directory of Open Access Journals