A High-Aspect-Ratio Deterministic Lateral Displacement Array for High-Throughput Fractionation
| Autor: | Jonathan Kottmeier, Maike S. Wullenweber, Ingo Kampen, Arno Kwade, Andreas Dietzel |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Micromachines, Vol 15, Iss 6, p 802 (2024) |
| Druh dokumentu: | article |
| ISSN: | 15060802 2072-666X |
| DOI: | 10.3390/mi15060802 |
| Popis: | Future industrial applications of microparticle fractionation with deterministic lateral displacement (DLD) devices are hindered by exceedingly low throughput rates. To enable the necessary high-volume flows, high flow velocities as well as high aspect ratios in DLD devices have to be investigated. However, no experimental studies have yet been conducted on the fractionation of bi-disperse suspensions containing particles below 10 µm with DLD at a Reynolds number (Re) above 60. Furthermore, devices with an aspect ratio of more than 4:1, which require advanced microfabrication, are not known in the DLD literature. Therefore, we developed a suitable process with deep reactive ion etching of silicon and anodic bonding of a glass lid to create pressure-resistant arrays. With a depth of 120 µm and a gap of 23 µm between posts, a high aspect ratio of 6:1 was realized, and devices were investigated using simulations and fractionation experiments. With the two-segmented array of 3° and 7° row shifts, critical diameters of 8 µm and 12 µm were calculated for low Re conditions, but it was already known that vortices behind the posts can shift these values to lower critical diameters. Suspensions with polystyrene particles in different combinations were injected with an overall flow rate of up to 15 mL/min, corresponding to Re values of up to 90. Suspensions containing particle combinations of 2 µm with 10 µm as well as 5 µm with 10 µm were successfully fractionated, even at the highest flow rate. Under these conditions, a slight widening of the displacement position was observed, but there was no further reduction in the critical size as it was for Re = 60. With an unprecedented fractionation throughput of nearly 1 L per hour, entirely new applications are being developed for chemical, pharmaceutical, and recycling technologies. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|