| Autor: |
Miłek T., Kowalik B., Kuliński B. |
| Jazyk: |
angličtina |
| Rok vydání: |
2015 |
| Předmět: |
|
| Zdroj: |
Archives of Metallurgy and Materials, Vol 60, Iss 4, Pp 3043-3050 (2015) |
| Druh dokumentu: |
article |
| ISSN: |
2300-1909 |
| DOI: |
10.1515/amm-2015-0486 |
| Popis: |
The paper presents evaluation of the possibility of performing cold backward extrusion of axisymmetrical thin-walled aluminum (Al 99.50, ENAW-1050A) die stampings with a square section at the strain ε=ln(A0/A1)=2 (where A0 - cross sectional area of the billet, A1 - cross sectional area of the die stamping), and the ratio h1/b=3.6 (where h1 - height of the die stamping in mm, b - width of the base of the die stamping in mm). The analysis was conducted on the basis of the results of computer modelling (FEM) and experimental investigations on backward extrusion. The boundary conditions for numerical calculations were determined experimentally with respect to the flow curve and mechanical properties of aluminum. The results of investigations into backward extrusion of thin-walled square-sectioned aluminum die stampings might be used as guidelines to develop a technological process for industrial practice. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
