Flash sintering of zircon: rapid consolidation of an ultrahigh bandgap ceramic
| Autor: | Juan Manuel Martinez, Mattia Biesuz, Jian Dong, Matias Gauna, Gustavo Suarez, Vincenzo M. Sglavo, Hua-Tay Lin, Salvatore Grasso, Nicolas M. Rendtorff |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Journal of Asian Ceramic Societies, Vol 9, Iss 1, Pp 374-381 (2021) |
| Druh dokumentu: | article |
| ISSN: | 2187-0764 21870764 |
| DOI: | 10.1080/21870764.2020.1869882 |
| Popis: | Zircon (ZrSiO4) is a refractory structural ceramic material difficult to consolidate because of its thermal dissociation into ZrO2 and SiO2. Addition of sintering aids can improve its densification, but with detrimental effects on high temperature mechanical properties and corrosion resistance. In this work, zircon was consolidated by employing the Flash Sintering (FS) technique at a furnace temperature of 1250°C under an electrical field of 1000 V cm−1. The decomposition of zircon was significantly reduced by lowering sintering time and current density. Unlike conventional sintering methods, FS approach allowed to track the degree of dissociation by measuring the electrical resistivity, providing a promising route for the consolidation of such materials. Although the obtained zircon ceramics are characterized by lower density and hardness/toughness than those sintered by alternative advanced techniques (like SPS of HEBM activated powders), the consolidation can be carried out at remarkably reduced furnace temperature. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|