Multi-objective design optimization of polymer spur gears using a hybrid approach

Autor: Marah A. Elsiedy, Hesham A. Hegazi, Ahmed M. El-Kassas, Abdelhameed A. Zayed
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: Journal of Engineering and Applied Science, Vol 71, Iss 1, Pp 1-17 (2024)
Druh dokumentu: article
ISSN: 1110-1903
2536-9512
DOI: 10.1186/s44147-024-00443-5
Popis: Abstract Polymer gears are used in applications requiring small to moderate loads to effectively transmit power and use the limited place available as possible. Various commercial standards have been provided designers with the rating criteria and acquaintance of different polymer material properties for the process of design. However, the result was unsatisfactory in terms of economy, time, and the optimality of the product. Thus, classic and stochastic algorithms have been embraced to reach the best design of polymer gears. Taking advantage of the former and latter algorithm’ methods, optimal design of gears could be attained with an increased gear life span and decreased failure modes. In this study, polyoxymethylene (POM) spur gear set has been optimized combining the mathematical model from plastic standards and hybrid optimization approach of multi-objective genetic algorithm (MOGA) and sequential quadratic programming (SQP). Weight and power loss were the objective functions. Five design variables were optimized with the satisfaction of bending and contact stresses, temperature, wear, and deformation as constraints. Solutions of the problem were formulated as Pareto optimal set. The results of multi-objective were compared with previously published single-objective optimization. The results favored multi-objective optimization (82.67%, 31.39% reduction in weight and power loss respectively) as it gave the best applicable solution fitting in real life situations. The results also went hand in hand with literature confirming the efficiency of the proposed algorithm. With the variation of operating parameters, various optimal designs could be obtained where the designers can choose the design that is suitable for a particular application.
Databáze: Directory of Open Access Journals
Externí odkaz: