Autor: |
Sina Safaei, Carsten Mehring |
Jazyk: |
angličtina |
Rok vydání: |
2024 |
Předmět: |
|
Zdroj: |
Fluids, Vol 9, Iss 2, p 41 (2024) |
Druh dokumentu: |
article |
ISSN: |
2311-5521 |
DOI: |
10.3390/fluids9020041 |
Popis: |
In this work, we investigate the effect of dissolved gas concentration on cavitation inception and cavitation development in a transparent sharp-edged orifice, similar to that previously analyzed by Nurick in the context of liquid injectors. The working liquid is water, and carbon dioxide is employed as a non-condensable dissolved gas. Cavitation inception points are determined for different dissolved gas concentration levels by measuring wall-static pressures just downstream of the orifice contraction and visually observing the onset of a localized (vapor) bubble cloud formation and collapse. Cavitation onset correlates with a plateau in wall-static pressure measurements as a function of a cavitation number. An increase in the amount of dissolved carbon dioxide is found to increase the cavitation number at which the onset of cavitation occurs. The transition from cloud cavitation to extended-sheet or full cavitation along the entire orifice length occurs suddenly and is shifted to higher cavitation numbers with increasing dissolved gas content. Volume flow rate measurements are performed to determine the change in the discharge coefficient with the cavitation number and dissolved gas content for the investigated cases. CFD analyses are carried out based on the cavitation model by Zwart et al. and the model by Yang et al. to account for non-condensable gases. Discharge coefficients obtained from the numerical simulations are in good agreement with experimental values, although they are slightly higher in the cavitating case. The earlier onset of fluid cavitation (i.e., cavitation inception at higher cavitation numbers) with increasing dissolved carbon dioxide content is not predicted using the employed numerical model. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|