| Autor: |
Juan Li, Wentao Jiang, Chunlin Xia, Yuting Deng, Yue Gao, Changyi Yang |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Metals, Vol 14, Iss 8, p 854 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2075-4701 |
| DOI: |
10.3390/met14080854 |
| Popis: |
The microstructural stability and property evolution of high-temperature titanium alloys under long-term high-temperature conditions has been a critical scientific issue in the field of advanced titanium alloys. In this work, we systematically investigated the precipitation behavior of silicides and ordered α2 phase, which are closely related to the microstructural stability of Ti65 high-temperature alloy, during thermal exposure at 650 °C for different periods of time. Furthermore, the effects of thermal exposure on mechanical properties were evaluated using room temperature and high temperature tensile tests, and subsequently, the correlation between the microstructural thermal stability and the mechanical characteristics was discussed. The results reveal that (Ti, Zr)6Si3 silicides initially precipitate within the residual β film and then start to precipitate in the α platelet. A large number of fine spherical α2 precipitates were formed inside the α platelet after a short thermal exposure. The number density of ordered α2 decreased significantly after 1000 h due to Ostwald ripening. The precipitation of silicides and ordered α2 phases during thermal exposure improves the tensile strength but deteriorates the ductility, and the room-temperature ductility is slightly restored due to α2 ripening after long-time thermal exposure. Ti65 high-temperature titanium alloy consistently maintains favorable room-temperature tensile properties throughout long-term thermal exposure. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
