Use of Field Flexural Demand Data for Reliability-Based Analysis and Design of Concrete Railroad Sleepers

Autor: J. Riley Edwards, Alvaro E. Canga Ruiz, Josué César Bastos, Yubing Liang, Marcus S. Dersch
Jazyk: angličtina
Rok vydání: 2020
Předmět:
Zdroj: Frontiers in Built Environment, Vol 6 (2020)
Druh dokumentu: article
ISSN: 2297-3362
DOI: 10.3389/fbuil.2020.582948
Popis: Concrete sleepers are commonly used to constructed ballasted track infrastructure in demanding locations on heavy axle load (HAL) freight railroads with steep grades, sharp curves, and high annual gross tonnage. Center flexural cracking is one of the most common factors limiting the service life of concrete sleepers in North America, and rail seat cracking has also been documented as a performance concern. As such, development and implementation of a structural design method that enables optimization of sleeper design for varied applications and loading environments will reduce initial capital cost and recurring maintenance expense. Field instrumentation has been developed to reliably capture revenue service field flexural demands, facilitating a probabilistic design method for the flexural capacity of concrete sleepers with bending data as the primary input. This paper presents a design process based on structural reliability analysis (SRA) concepts whereby target values for reliability indices (β) for new designs are obtained and compared with existing designs for further design optimization. New (proposed) designs are quite different from current ones. The need for increased sleeper center bending capacity is indicated. Additionally, a reduction in rail seat bending capacity of approximately 40% is justified, reducing the size of the rail seat cross section by approximately the same magnitude. In most cases the proposed designs have fewer prestressing wires and a higher centroid of prestressing steel. In all cases the flexural capacities at the sleeper center and rail seat are better balanced from a structural reliability standpoint. The method proposed is applicable to ballasted track infrastructure constructed with monoblock concrete sleepers.
Databáze: Directory of Open Access Journals