The use of an unmanned aerial vehicle for fracture mapping within a marble quarry (Carrara, Italy): photogrammetry and discrete fracture network modelling
Autor: | Riccardo Salvini, Giovanni Mastrorocco, Marcello Seddaiu, Damiano Rossi, Claudio Vanneschi |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2017 |
Předmět: | |
Zdroj: | Geomatics, Natural Hazards & Risk, Vol 8, Iss 1, Pp 34-52 (2017) |
Druh dokumentu: | article |
ISSN: | 1947-5705 1947-5713 19475705 |
DOI: | 10.1080/19475705.2016.1199053 |
Popis: | This paper describes the use of a drone in collecting data for mapping discontinuities within a marble quarry. A topographic survey was carried out in order to guarantee high spatial accuracy in the exterior orientation of images. Photos were taken close to the slopes and at different angles, depending on the orientation of the quarry walls. This approach was used to overcome the problem of shadow areas and to obtain detailed information on any feature desired. Dense three-dimensional (3D) point clouds obtained through image processing were used to rebuild the quarry geometry. Discontinuities were then mapped deterministically in detail. Joint attitude interpretation was not always possible due to the regular shape of the cut walls; for every discontinuity set we therefore also mapped the uncertainty. This, together with additional fracture characteristics, was used to build 3D discrete fracture network models. Preliminary results reveal the advantage of modern photogrammetric systems in producing detailed orthophotos; the latter allow accurate mapping in areas difficult to access (one of the main limitations of traditional techniques). The results highlight the benefits of integrating photogrammetric data with those collected through classical methods: the resulting knowledge of the site is crucially important in instability analyses involving numerical modelling. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |