| Popis: |
This study explored the application of nitrogen-doped graphene (NDG) ink to the coating of light-emitting diode (LED) lamps for the thermal management. Unlike the general solutions of graphene, the NDG ink used in this study was tuned with high electrical resistance and quietly suitable for the application of the LED lamp coating, which prevented the short circuit problem; besides, the NDG ink also provided a high heat dissipation effect to improve the performance of the LED lamp. The investigation of adhesion and resistance for the NDG ink were conducted by the cross-cut test and the four-point probe resistance measurement, respectively. Three types of LED lamps including the original lamp, fin-removed lamp, and NDG-ink coated (NGC) lamp were tested for the actual operating temperature distribution by K-type thermal couples and for the lumens by the integrating sphere. The results showed that the heat dissipation of the NGC lamp was better than that of the original lamp. In addition, the inspections for the properties of NDG powder were also performed by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and Raman spectroscopy. According to the inspectional results, the NDG powder had a percentage of nitrogen of about 3.8% by XPS, a surface roughness Rq of 0.9 nm by AFM, and over ten layers by Raman analysis. It showed that the NDG powder in this study belonged to the type of multi-layer graphene. |
