Numerical investigation of high temperature synthesis gas premixed combustion via ANSYS Fluent
| Autor: | Pashchenko Dmitry |
|---|---|
| Jazyk: | English<br />French |
| Rok vydání: | 2018 |
| Předmět: | |
| Zdroj: | MATEC Web of Conferences, Vol 145, p 03012 (2018) |
| Druh dokumentu: | article |
| ISSN: | 2261-236X 20181450 |
| DOI: | 10.1051/matecconf/201814503012 |
| Popis: | A numerical model of the synthesis gas pre-mixed combustion is developed. The research was carried out via ANSYS Fluent software. Verification of the numerical results was carried out using experimental data. A visual comparison of the flame contours that obtained by the synthesis gas combustion for Re = 600; 800; 1000 was performed. A comparison of the wall temperature of the combustion chamber, obtained with the help of the developed model, with the results of a physical experiment was also presented. For all cases, good convergence of the results is observed. It is established that a change in the temperature of the syngas/air mixture at the inlet to the combustion chamber does not significantly affect the temperature of the combustion products due to the dissipation of the H2O and CO2 molecules. The obtained results are of practical importance for the design of heat engineering plants with thermochemical heat recovery. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|