Effect of Al2O3 on migration and distribution of chromium and chromium fixation effect in stainless-steel slag glass-ceramics
| Autor: | Zhang Chuanbo, Tong Zhifang, Xu Congcong, Wang Jiaxing, Jia Zhiheng |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Processing and Application of Ceramics, Vol 17, Iss 1, Pp 70-80 (2023) |
| Druh dokumentu: | article |
| ISSN: | 1820-6131 2406-1034 |
| DOI: | 10.2298/PAC2301070Z |
| Popis: | Stainless-steel slag was used to prepare glass-ceramics, which could solidify chromium (Cr) in the slag. The migration and distribution state of chromium in the slag during the preparation of the glass-ceramics have a great influence on the chromium fixation ability of the glass-ceramics. In this paper, the effects of Al2O3 content in the glass-ceramics on the migration and distribution of chromium during the nucleation and crystallization steps, and on the chromium fixation effect of the glass-ceramics were systematically studied. The results show that in the nucleation stage, with the increase of Al2O3 content, the number of chromium spinel (Cr-spinel) nanocrystals formed in the glass first increases and then decreases, and Cr in the glass phase gradually migrates to Cr-spinel nanocrystals. TEM and XPS analyses show that during crystallization, part of Cr in Cr-spinel diffuses into diopside lattice, and the other part of Cr still exists in Cr-spinel wrapped by diopside. Cr in the glass phase also diffuses and migrates into the diopside lattice with the formation of diopside crystals. The optimal Al2O3 content is 11.8wt.%, which results in 97.94wt.% of the total Cr being fixed in the diopside crystalline phase. The ability of chromium fixation is very high giving a very low Cr leaching concentration of 0.004mg/l. The research results provide theoretical and technical support for increased chromium fixation and realizing harmless and high-value utilization of stainless-steel slag. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|