| Popis: |
Collisions of over-height vehicles with low clearance bridges is commonly encountered worldwide. They have caused damage to bridge structures, interruption to traffic, injuries or even fatalities to road users. To mitigate such risks, passive systems that involve warning gantries, flashing lights and illuminated signage are commonly installed. Semi-active systems using laser- or infrared-based detection systems in conjunction with visual warnings have been implemented. Nevertheless, some drivers ignore these visual warnings and collisions continue to occur. This paper presents a novel concept for a collision prevention system, which makes use of a series of sensor-activated, motorized rumble strips. These rumble strips span across a certain distance ahead of a low clearance bridge. When an over-height vehicle is detected, a mechanism is triggered which elevates the rumble strips. The noise and vibrations produce a vigorous alert to the offending driver. They also increase effective friction of the road surface, thus assisting to slow down the vehicle and shorten the stopping distance. The strips will be lowered after a certain time has elapsed, thus minimizing their effects on other vehicles. This article presents a conceptual framework and quantifies the vibration and noise caused by rumble strips in road tests. Road tests indicated that the vibration level typically exceeded 1 g and noise level reached approximately 90 dB in the cabin of a 3.5-ton truck. Fabrication of a proof-of-concept mechanized rumble strip model was presented and verified in an outdoor environment. The circuitry and mechanical design, and requirements in actual implementation, are discussed. The proposed event-triggered rumble strip system could significantly mitigate over-height vehicle collisions that cause major disruptions and injuries worldwide. Further works, including a comprehensive road test involving various types of vehicles, are envisaged. |
