| Autor: |
Jianguo Peng, Yong Yang, Moucheng Li |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Materials Research Express, Vol 7, Iss 4, p 046502 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2053-1591 |
| DOI: |
10.1088/2053-1591/ab81c0 |
| Popis: |
The pickling behaviour of 2205 DSS hot-rolled strips after annealing and sand blasting was studied in the mixed solutions of HNO _3 -HF using weight loss rate, surface analysis, corrosion potential, and electrochemical impedance spectroscopy measurements. The pickling rate decreased as the concentration of HNO _3 increased in the mixed solutions of x HNO _3 + 25 g l ^−1 HF ( x = 40 ∼ 200 g l ^−1 ) at 50 °C due to passivation. The passivating effect of HNO _3 became weak as its concentration was less than 80 g l ^−1 . The pickling rate increased noticeably when the concentration of HF in the mixed solutions of 120 g l ^−1 HNO _3 + y HF ( y = 5 ∼ 80 g l ^−1 ) at 50 °C was increased. The dissolution of the metal under the oxide scale may have changed from the passive state to the active state as the HF concentration was higher than 25 g l ^−1 . The pickling dissolution accelerated noticeably as the temperature rose from 40 to 60 °C. With the optimised pickling process, 2205 DSS hot-rolled strips can be pickled industrially with good efficiency and surface topography. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
