| Autor: |
Zinurov Vadim E., Dmitriev Andrey V., Badretdinova Guzel R., Bikkulov Rustem Ya., Madyshev Ilnur N. |
| Jazyk: |
English<br />French |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
MATEC Web of Conferences, Vol 329, p 03035 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2261-236X |
| DOI: |
10.1051/matecconf/202032903035 |
| Popis: |
In order to increase the efficiency of gas purification from the particles of up to 20 microns and to increase the service life of bag and electrostatic filters, the authors propose to use a centrifugal separation device with coaxially arranged pipes to be installed before the fine purification devices. The numerical studies of gas dynamics in a separation device were conducted in ANSYS Fluent software package. As a result of conducted numerical studies, it was found that the pressure loss in the centrifugal separation device is not more than 70 Pa at the inlet gas flow rate from 1 to 15 m/s and the width of rectangular hole within the range from 10 to 15 mm. The low pressure losses are caused by the design features; in particular, the resulting vortices in the inter-cylindrical space practically do not contact the wall surfaces of device. The equations of pressure loss depending on the width of rectangular holes and the hydraulic resistance coefficient of separation device depending on the inlet gas flow rate were obtained. The design coefficient of hydraulic resistance of separation device was equal to 0.45. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
