The effect of zinc on the microstructure and phase transformations of casting Al-Cu alloys
| Autor: | Manasijević Ivana I., Štrbac Nada D., Živković Dragana T., Balanović Ljubiša T., Minić Duško M., Manasijević Dragan M. |
|---|---|
| Jazyk: | English<br />Serbian |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Tehnika, Vol 71, Iss 4, Pp 553-559 (2016) |
| Druh dokumentu: | article |
| ISSN: | 0040-2176 2560-3086 |
| DOI: | 10.5937/tehnika1604553M |
| Popis: | Copper is one of the main alloying elements for aluminum casting alloys. As an alloying element, copper significantly increases the tensile strength and toughness of alloys based on aluminum. The copper content in the industrial casting aluminum alloys ranges from 3,5 to 11 wt.%. However, despite the positive effect on the mechanical properties, copper has a negative influence on the corrosion resistance of aluminum and its alloys. In order to further improve the properties of Al-Cu alloys they are additional alloyed with elements such as zinc, magnesium and others. In this work experimental and analytical examination of the impact of zinc on the microstructure and phase transformations of Al-Cu alloys was carried out. In order to determine the effect of the addition of zinc to the structure and phase transformations of Al-Cu alloys two alloys of Al-Cu-Zn system with selected compositions were prepared and then examined using scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDX). The experimental results were compared with the results of thermodynamic calculations of phase equilibria. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|