| Autor: |
Björn Beckschwarte, Lasse Langstädtler, Christian Schenck |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Engineering Proceedings, Vol 26, Iss 1, p 4 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2673-4591 |
| DOI: |
10.3390/engproc2022026004 |
| Popis: |
Due to their low inertia, vibrations are stimulated during electromagnetic forming of thin sheets, whereby the excitation might involve the impact on the die and the oscillation of the electromagnetic forces. Depending on the configuration of the pulsed power generator and the resulting tool coil current, forced and free workpiece vibrations could be observed in experiments. The results indicate an influence of the vibrations on the springback behavior after thin sheet metal forming. Due to the workpiece vibration, the forming behavior changed. The results emphasize the need of designing pulsed power generators that adapt to the desired process. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
