Mechanical and Electrical Properties of Polylactic Acid with Aliphatic-Aromatic Polyester
Autor: | Katsuyoshi Shinyama |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2018 |
Předmět: | |
Zdroj: | Journal of Engineering, Vol 2018 (2018) |
Druh dokumentu: | article |
ISSN: | 2314-4904 2314-4912 |
DOI: | 10.1155/2018/6597183 |
Popis: | Assuming an application where polylactic acid (PLA), a hard bioplastic, is used to sheath electrical wire, the author added 20 wt% of aliphatic-aromatic polyester or polybutyrate adipate terephthalate (PBAT), a soft resin, to PLA and then investigated the softened PLA’s mechanical and electrical properties. As a result of adding PBAT to PLA, Tg shifted to about 10°C lower than PLA. In addition, adding PBAT to PLA made the PLA softer and even more so at temperatures above 40°C. Furthermore, adding PBAT to PLA decreased the electric breakdown strength (EB) of the PLA by about 1 MV/cm over the temperature range of 0°C to 50°C, and EB was slightly higher than that of PVC over the temperature range of −10 to 60°C. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |