Research of independent DC electric field sensor with wireless power supply circuit
Autor: | Jianzhong When, Zhanqing Yu, Chao Zhang, Ya Mou, Yaosheng Huang, Zhiming Zhen |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2019 |
Předmět: |
electric field measurement
inductive power transmission electric fields microstrip antennas power supply circuits microwave power transmission HVDC power transmission receiving antennas permittivity space electric field battery-powered solution EFS high-voltage electric field environment power system wireless energy supply solution potential isolation wireless power transmission systems microwave wireless power transmission system independent DC electric field sensor wireless power supply circuit DC electric field strength important electromagnetic environment parameter HVDC transmission line measurement results frequency 5.8 GHz gain 4.26 dB distance 10.0 m Engineering (General). Civil engineering (General) TA1-2040 |
Zdroj: | The Journal of Engineering (2019) |
Druh dokumentu: | article |
ISSN: | 2051-3305 |
DOI: | 10.1049/joe.2018.8549 |
Popis: | The DC electric field strength is an important electromagnetic environment parameter of the high-voltage direct current (HVDC) transmission line. Measurement results of the space electric field are dramatically affected by the size and the potential of the sensor. In addition, the battery-powered solution of electric field sensor (EFS) is not feasible, for the reason that in the high-voltage electric field environment, the replacement of the battery will bring security risks to the power system and workers. The wireless energy supply solution not only solves the problem of potential isolation of the sensor, but also ensures that the sensor can work continuously. Various wireless power transmission systems (WPTSs) were compared. Microwave wireless power transmission system (MWPTS) was selected as the power supply of EFS. The key boundary conditions of MWPTS were determined. Two microstrip receiving antennas were designed in this article. A good performance antenna with high permittivity substrate was designed, realising 4.26 dB gain with the area of 1 cm^2 at 5.8 GHz. The antenna meets the energy requirements of the EFS which is 10 m far from the source. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |