| Autor: |
Kunar S., Rajkeerthi E., Mandal K., Bhattacharyya B. |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Manufacturing Review, Vol 7, p 15 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2265-4224 |
| DOI: |
10.1051/mfreview/2020012 |
| Popis: |
Maskless electrochemical micromachining (EMM) is a prominent technique for producing the array of micro circular impressions. A method for producing the array of micro circular impressions on stainless steel workpiece applying maskless electrochemical micromachining process is presented. The experimental setup consists of maskless EMM cell, electrode holding devices, electrical connections of electrodes and constricted vertical cross flow electrolyte system to carry out the experimental investigation. One non-conductive masked patterned tool can produce more than twenty six textured samples with high quality. A mathematical model is developed to estimate theoretically the radial overcut and machining depth of the generated array of micro circular impressions by this process and corroborate the experimental results. This study provides an elementary perceptive about maskless EMM process based on the effects of EMM process variables i.e. pulse frequency and duty ratio on surface characteristics including overcut and machining depth for NaCl, NaNO3 and NaNO3 + NaCl electrolytes. From the experimental investigation, it is observed that the combined effect of lower duty ratio and higher frequency generates the best array of micro circular impressions using the mixed electrolyte of NaNO3 + NaCl with mean radial overcut of 23.31 µm and mean machining depth of 14.1 µm. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
