Autor: |
Shi-Long Xing, He-Yong Xu, Wei-Guo Zhang |
Jazyk: |
angličtina |
Rok vydání: |
2022 |
Předmět: |
|
Zdroj: |
International Journal of Aerospace Engineering, Vol 2022 (2022) |
Druh dokumentu: |
article |
ISSN: |
1687-5974 |
DOI: |
10.1155/2022/1674074 |
Popis: |
This study focuses on the effect of the upward deflection of trailing edge flap (TEF) on the strength and trajectory of dynamic stall vortex (DSV) around a pitching airfoil by means of numerical simulations based on unsteady Reynolds-averaged Navier-Stokes (URANS). The effect of the upward deflection of the TEF on the unsteady aerodynamic forces due to DSV is analyzed. The numerical simulation method for large mesh deformation is constructed. Radial basis function- (RBF-) based mesh deformation algorithm, as well as Laplacian and optimization-based mesh smoothing algorithm, is adopted to ensure the mesh quality in flow field simulations. The results reveal that the upward deflection of the TEF can reduce the peaks of drag and pitching moment coefficients. Although the maximum lift coefficient of the airfoil is slightly reduced, its maximum drag and pitching moment coefficients are significantly reduced by up to 34.8% and 31.8%, respectively. The vorticity transport behavior in a planar control region during the DSV formation and detachment is analyzed. It is found that the TEF can change the development process of the DSV. The upward deflection of the TEF reduces the vorticity flux from the leading edge shear layer, which causes the circulation of the DSV and the translational velocity of the vortex center to decline. The peaks of the unsteady aerodynamic forces on the airfoil induced by the DSV are reduced. The upward deflection of the TEF plays the role of alleviating the pitching moment load. The longer TEF can result in a better control effect. The bigger the upward deflection angle of the TEF, the better its control effect. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|