A Study of Color Fixation Agents in Secondary Alcohol Ethoxylate-Based Reverse Micellar Cotton Dyeing System with Reactive Dyes
| Autor: | Yiu Lun Alan Tang, Ho Shing Law, Shixin Jin, Cheng Hao Lee, Jiali Yu, Yanming Wang, Chi-Wai Kan |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Journal of Natural Fibers, Vol 21, Iss 1 (2024) |
| Druh dokumentu: | article |
| ISSN: | 15440478 1544-046X 1544-0478 |
| DOI: | 10.1080/15440478.2024.2399675 |
| Popis: | Influence of color fixation agent (CFA) and dyebath pH in secondary alcohol ethoxylate (SAE)-based reverse micellar dyeing system of cotton with reactive dyes was investigated and compared with water-based dyeing system using different alkali (i.e. CFA) such as: (i) sodium bicarbonate (NaHCO3), (ii) sodium carbonate (Na2CO3) and (iii) sodium hydroxide (NaOH). The color, tensile strength, fastness and surface morphological properties of dyed samples were examined. Experimental results showed that samples dyed with Na2CO3 can achieve the highest color yield, followed by NaHCO3 and NaOH in both water-based and reverse micellar dyeing system. The color yield and reflectance percentage of the dyed cotton samples were found to be closely related to the dyebath pH value. Relative unlevelness indices (RUI) also reflected that cotton samples dyed with NaOH in reverse micellar dyeing system have a higher chance of color unlevelness when compared with NaHCO3 and Na2CO3. Tensile strength results affirm that higher alkalinity of dyebath could cause higher strength loss to the colored cotton samples. Both cotton samples dyed by water and SAE approach showed good to excellent color fastness properties while scanning electron microscopic (SEM) images exhibit that the use of different alkalis may cause some damage to the cotton fiber. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|