| Popis: |
In this paper, the compact reducer which can be used as a rigid drive mechanism with a high-speed reduction ratio is systematically studied for kinematics and dynamics. The speed ratio is determined by the number of cam lobes and engaged rollers. The eccentric rotating conjugate lobe cam profile is synthesized by using the rigid body transformation method. To characterize the input torque based on Newton’s second law, the transmission forces of the resisting and driven multi-roller are proportional to the arm length of each actuating roller found by its geometric vector. In consideration of machining undercutting, roller limit load, and contact stresses, favorable designs can be achieved by adjusting the cam size, turret dimension, eccentricity, and roller size. Together with experimental tests, a prototype of the lobe cam reducer is made to verify the feasibility of the proposed design procedure and to investigate its kinematic and dynamic characteristics for speed reduction ratios, torques, and transmission efficiency. |
