| Popis: |
Oscillating laser-arc hybrid welding of AZ31B magnesium alloy was carried out, the effects of beam oscillation parameters on pore inhibition, microstructure, grain boundary characteristics and tensile properties were investigated. The results showed that the pore formation can be inhibited with oscillating frequency higher than 75 Hz and radius smaller than 0.5 mm. The columnar grains neighboring the fusion line can be broken by the beam oscillation behavior, while the grain growth was promoted with the increase of frequency or radius. It should be noted that the coincidence site lattice (CSL) boundaries were mainly Σ13b and Σ29 boundaries, which were contributed by {101¯2} tensile twins and {112¯2} compression twins, respectively. The total fraction of CSL boundaries reached maximum at radius of 0.25 mm and frequency of 75 Hz, which was also confirmed as the optimized parameters. In this case, the elongation rate increased up to 13.2%, 12.8% higher than that of the weld without beam oscillation. Finally, the pore formation and inhibition mechanisms were illustrated according to the state of melt flow and keyhole formation, the abnormal growth was discussed basing on secondary recrystallization, and the relationship among the pore formation, grain size, boundary characteristics and weld toughness were finally established. |
