| Autor: |
Jae-Kyung Kim, Sang-Tae Park, Jong-Yong Lee, Kyu-Hwan Oh, Bo Jiang, Sang-Keun Oh, Boo-Seong Kang |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Applied Sciences, Vol 13, Iss 9, p 5540 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2076-3417 |
| DOI: |
10.3390/app13095540 |
| Popis: |
In this study, the relationship between viscosity of synthetic polymer rubberized gel (SPRG) used for waterproofing and adhesive strength on varying degrees of wetted surfaces is examined. First, SPRG specimens of different ratios of viscosity modifiers were prepared (3% to 10%, interval of 1% per specimen type). These specimens were installed onto substrate surfaces of varying degrees of humidity ratio (0%, 10%, 20%, 30%, 50%, 70% and 100%). Upon following the standard installation procedure of the SPRG specimens, standard pull-off tests were conducted. Results of the test showed that a consistent relationship exists between the viscosity of synthetic polymer rubberized gel (SPRG) and its adhesive strength on different degrees of wetted surfaces. Linear regression analysis and subsequent calculation of the respective coefficient of determination leads to the result that viscosity is a relevant factor for achieving stable adhesion when it comes to the usage of SPRG waterproofing. The findings of this study could have significant implications for the development and application of adhesive gel waterproofing materials in various industries. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
