| Autor: |
Glinka Tadeusz, Bernatt Jakub |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Archives of Electrical Engineering, Vol 66, Iss 1, Pp 199-206 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2300-2506 |
| DOI: |
10.1515/aee-2017-0015 |
| Popis: |
The electric LSPMSM motor presented in the paper differs from standard induction motor by rotor design. The insulated start-up winding is located in slots along the rotor circumference. The winding ends are connected to the slip-rings. The rotor core contains permanent magnets. The electromechanical characteristics for synchronous operation were calculated, as were the start-up characteristics for operation with a short-circuited rotor winding. Two model motors were used for the calculations, the V-shaped Permanent Magnet (VPM) – Fig. 3, and the Linear Permanent Magnet (IPM) – Fig. 4, both rated at 14.5 kW. The advantages of the investigated motor are demonstrated in the conclusions. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
