| Autor: |
Bianca Brandl, Simone Eder, Andreas Hirtler, Gloria Khinast, Jeffrey Haley, Christian Schneider, Samuel Theissl, Andreas Bramboeck, Daniel Treffer, Sarah Heupl, Martin Spoerk |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Scientific Reports, Vol 14, Iss 1, Pp 1-12 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2045-2322 |
| DOI: |
10.1038/s41598-024-73424-6 |
| Popis: |
Abstract In this work, a novel tool for small-scale filament production is presented. Unlike traditional methods such as hot melt extrusion (HME), the device (i) allows filament manufacturing from small material amounts as low as three grams, (ii) ensures high diameter stability almost independent of the viscoelastic behavior of the polymer melt, and (iii) enables processing of materials with rheological profiles specifically tailored toward fused filament fabrication (FFF). Hence, novel materials, previously difficult to process due to HME limitations, become easily accessible for FFF for the first time. Here, we showcase the production of highly flexible drug-free, and drug-loaded filaments based on ethylene-vinyl acetate polymers with a vinyl acetate content of 28 w% (EVA28) and unprecedented high melt flow rates of up to 400 g/10 min. Owing to their low viscosity, FFF with low print nozzle sizes of 250 μm was achieved for the first time for EVA28. These small nozzle diameters facilitate 3D-printing of high-resolution structures in small-dimensional dosage forms such as subcutaneous implantable drug delivery systems, which can later be used for personalization. Consequently, the material portfolio for FFF is tremendously broadened, allowing material and formulation optimization toward FFF, independent of a preliminary extrusion process. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
