| Autor: |
Jiawei Sun, Dehua Ding, Wencai Liu, Guohua Wu, Hongjie Liu, Guangling Wei, Hezhou Liu |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Journal of Magnesium and Alloys, Vol 12, Iss 9, Pp 3574-3588 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2213-9567 |
| DOI: |
10.1016/j.jma.2022.09.020 |
| Popis: |
A novel Mg-10Li-3Al (wt.%, LA103) matrix composite reinforced by ex situ micron TiB2 particles was developed in the present study. The ball milling and cold pressing pretreatment of the reinforcements made it feasible to prepare this material under stir casting conditions with good dispersion. The microstructure and mechanical properties of the composites prepared by different pretreatment methods were analyzed in detail. The TiB2 particles in the Al-TiB2/LA103 composite using the pretreatment process were uniformly distributed in the microstructure due to the formation of highly wettable core-shell units in the melt. Compared with the matrix alloys, the Al-TiB2/LA103 composite exhibited effective strength and elastic modulus improvements while maintaining acceptable elongation. The strengthening effect in the composites was mainly attributed to the strong grain refining effect of TiB2. This work shows a balance of high specific modulus (36.1 GPa·cm3·g-1) and elongation (8.4%) with the conventional stir casting path, which is of considerable application value. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
