Autor: |
QUAN Zexin, WANG Zhaohui, DU Wenbo, SUN Yonghui, WANG Qiangsong |
Jazyk: |
čínština |
Rok vydání: |
2023 |
Předmět: |
|
Zdroj: |
Cailiao gongcheng, Vol 51, Iss 7, Pp 215-226 (2023) |
Druh dokumentu: |
article |
ISSN: |
1001-4381 |
DOI: |
10.11868/j.issn.1001-4381.2022.000181 |
Popis: |
Hot deformation behavior of as-cast BFe30-1-1 alloy was systematically investigated at the temperature of 750-1000 ℃ and the strain rate of 0.01-10 s-1. The effects of friction and adiabatic on the flow stress were analyzed. The stain-stress curves caused by frictional and adiabatic effects were corrected. The corrected curves were used to establish the Arrhenius constitutive equation, so as to the processing map of as-cast BFe30-1-1 alloy on the basis of dynamic material model. The microstructure evolution of alloy during hot deformation was investigated, which shows that the flow-stress increases with the decrease of deformation temperature and the increase of strain rate. Friction and temperature rise can influence the flow stress curves of alloys. The dynamic recrystallization occurs during the hot deformation. The average relative error between the predicted value and the experimental value of peak stress is less than 3.77%. It shows that the constitutive equation can accurately predict the flow stress of different hot deformation conditions. According to the hot processing map and microstructural analysis, the reasonable range of thermoplastic deformation process for BFe30-1-1 copper-nickel alloy is the deformation temperature of 900-1000 ℃ and the strain rate of 0.04 - 0.16 s-1. And more dynamic recrystallization grains of the alloy can be obtained at this deformation condition. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|