| Autor: |
Skanda Kumar Bangalore Narasimhaprasad, Chandre Gowda Cheluvegowda, Chandrashekar Ramakrishnaiah, Suhas Ramachandra, Sreenatha Mallikarjunaiah, Shashi Shankar Anantharamaiah |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Sustainable Environment Research, Vol 34, Iss 1, Pp 1-13 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2468-2039 |
| DOI: |
10.1186/s42834-024-00230-0 |
| Popis: |
Abstract India's rapid industrialization has led to an increase in waste generation, necessitating efficient disposal methods. This research addresses this challenge by exploring the use of Common Effluent Treatment Plant (CETP) sludge, a hazardous waste, in the production of Controlled Low-Strength Materials (CLSM). The study aims to mitigate the environmental impacts associated with CETP sludge disposal while providing a sustainable solution. To assess the feasibility of this approach, an experimental program was conducted with variations in the mix ratio of CETP sludge and slag sand, a byproduct of steel production. The properties of the produced CLSM, such as flowability and unconfined compressive strength (UCS), were thoroughly examined using Scanning Electron Microscopy, X-ray Diffraction, and X-ray Fluorescence analyses. The results reveal that the CLSM produced with CETP sludge and slag sand exhibits promising performance, with excellent flowability and UCS values ranging from 1.8 to 5.5 MPa. This research underscores the potential of waste materials in creating sustainable and environmentally friendly construction materials, contributing to effective waste management practices and sustainable industrial growth. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
Full text from SpringerLink