Synthesis and Characterization of Zn-Nix Advanced Alloys Prepared by Mechanical Milling and Sintering at Solid-State Process
| Autor: | José G. Miranda-Hernández, Héctor Herrera-Hernández, Carlos O. González-Morán, Jesús Noé Rivera Olvera, Ivanovich Estrada-Guel, Fabián Botello Villa |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | Advances in Materials Science and Engineering, Vol 2017 (2017) |
| Druh dokumentu: | article |
| ISSN: | 1687-8434 1687-8442 |
| DOI: | 10.1155/2017/7967848 |
| Popis: | Mechanical ball milling assisted by sintering in the solid state was used in this research to produce the Zn-Nix system alloy. The derivative powder compositions of Zn-Nix (x = 0, 5, 10, 15, and 20 wt.%) were obtained to study the Ni effects on the microstructural and mechanical properties. It is worth remarking that conventional methods are not appropriate for the manufacture of the Zn-Nix system alloy. The morphological structure and phases were examined by optical microscopy, X-ray diffraction, and SEM/EDS elemental mapping, whereas the mechanical behavior was accomplished by means of a diamond indentation print (Hardness Vickers). The results showed that the intermetallic γ-ZnNi phase did not form during milling time ( |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|