| Autor: |
Valery Rubtsov, Andrey Chumaevskii, Evgeny Knyazhev, Veronika Utyaganova, Denis Gurianov, Alihan Amirov, Andrey Cheremnov, Evgeny Kolubaev |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Metals, Vol 14, Iss 1, p 105 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2075-4701 |
| DOI: |
10.3390/met14010105 |
| Popis: |
In this work, the interaction of an additively produced Ti-4Al-3V titanium alloy with a nickel superalloy tool and the features of the stir zone formation during friction stir processing have been studied. The stop-action technique was used to produce the samples to be studied using optical and scanning electron microscopy methods, as well as microhardness measurements. As a result, it was revealed that the tool, when moving, forms a pre-deformed area in front of it, which is characterized by a fine-grained structure. The presence of an interface layer between the workpiece material and primary fragmentation by the tool was revealed. It was demonstrated that the transfer of titanium alloy material occurs periodically following the ratio of feeding speed to tool rotation rate. Metal flow around the tool can occur in both laminar and vortex modes, as indicated by the tool material stirred into the transfer layer and used as a marker. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
