| Autor: |
Winiowski A., Majewski D. |
| Jazyk: |
angličtina |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
Archives of Metallurgy and Materials, Vol 61, Iss 1, Pp 133-142 (2016) |
| Druh dokumentu: |
article |
| ISSN: |
2300-1909 |
| DOI: |
10.1515/amm-2016-0025 |
| Popis: |
The article presents the course and the results of technological tests related to TIG-based arc braze welding of titanium and AW-5754 (AlMg3) aluminium alloy. The tests involved the use of an aluminium filler metal (Al99.5) and two filler metals based on Al-Si alloys (AlSi5 and AlSi12). Braze welded joints underwent tensile tests, metallographic examinations using a light microscope as well as structural examinations involving the use of a scanning electron microscope and an X-ray energy dispersive spectrometer (EDS). The highest strength and quality of welds was obtained when the Al99.5 filler metal was used in a braze welding process. The tests enabled the development of the most convenient braze welding conditions and parameters. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
