Finite element study of the effects of fragment shape and screw configuration on the mechanical behavior of tibial tubercle osteotomy

Autor: Chih-Wei Chang, Yen-Nien Chen, Chun-Ting Li, Chi-Rung Chung, Chih-Han Chang, Yao-Te Peng
Jazyk: angličtina
Rok vydání: 2019
Předmět:
Zdroj: Journal of Orthopaedic Surgery, Vol 27 (2019)
Druh dokumentu: article
ISSN: 2309-4990
23094990
DOI: 10.1177/2309499019861145
Popis: Purpose: Tibial tubercle osteotomy (TTO) is a surgical technique used in the management of severe fractures of the knee joint and revision total knee arthroplasty. Limited research discusses the performance of the osteotomy and fixation of the TTO with screws. Therefore, this study investigated the effects of fragment shape and screw configuration on the mechanical behavior in the fixation of the TTO using the finite element (FE) method. Methods: FE TTO models with three fragment shapes and three screw configurations were developed. The three fragment shapes were a step cut, bevel cut, and straight cut. The screw configurations were two parallel horizontal and downward screws and two trapezoidal screws. A 1654-N upward tension force was applied on the tibia tubercle, and the distal end of the tibia was completely fixed. Results: The results indicated that the step cut resulted in higher stability than the bevel and straight cut, but the stress was higher as well. Among the screw configurations, two parallel downward screws resulted in the highest stability, given the same fragment shape. In the horizontal configuration, the step cut tibia developed the largest contact force to achieve stability of the bone fragment under loading. Conclusion: The fragment shape with a step cut and fixation with two parallel horizontal or downward screws are suggested for TTO, while the trapezoidal screw configuration is not suggested. Furthermore, the downward screw configuration is a suitable strategy to reduce bone stress.
Databáze: Directory of Open Access Journals
Externí odkaz: