| Autor: |
Lisa Yihaa Roodhiyah, Nurhasan, Tiffany, Prihandhanu Mukti Pratomo, Anggie Susilawati, Supriyadi, Yasuo Ogawa, Didik Sugiyanto, Doddy Sutarno, Wahyu Srigutomo |
| Jazyk: |
angličtina |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
Applied Sciences, Vol 14, Iss 23, p 11335 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2076-3417 |
| DOI: |
10.3390/app142311335 |
| Popis: |
The Sumatran Fault runs from the southeast (SE) to the northwest (NW) of Sumatra Island, with the highest slip rates reaching about 3.0 cm per year in the northwestern part. There is a seismic gap along this fault, including the northern Aceh domain, which consists of the Aceh and Seulimeum fault segments. Previous studies have used various methods to investigate the Sumatran Fault system, including seismic, geoelectric, gravity anomaly, and magnetotellurics (MT). The MT method has proven advantageous as it can non-destructively image a wide range of depths. However, previous studies using the two-dimensional (2D) MT inversion did not represent realistic information of the subsurface conditions. Therefore, a three-dimensional (3D) MT data inversion was used in this study to obtain more realistic information about the resistivity structure of the Aceh and Seulimeum segments. The results confirmed that the Sumatran Fault is a strike-slip fault, with a relatively northwest (NW)–southeast (SE) direction of conductivity strike with an angle of S 71.61° E from Groom–Bailey decomposition of MT data. The 3D resistivity distribution model from 33 stations showed that the Aceh Fault Segment is 20–30 km away, while the Seulimeum Fault Segment is 55–60 km away based on the MT data. The results also indicated a creeping zone at a depth of 2 km beneath the Aceh Fault Segment. Different rock formations were identified beneath the fault system, with the western part of the Aceh Segment dominated by high-resistivity metamorphic rocks (150–1000 Ωm) from the Triassic–Cretaceous age. The zone between the Aceh and Seulimeum fault segments exhibited low resistivity, characterized by volcanic rocks (1–15 Ωm) from the Lam Teuba Volcanic Formation and the Indrapuri Formation. Beneath the eastern part of the Seulimeum Fault Segment was found to consist of low-resistivity quaternary volcanic rocks (1–15 Ωm) and high-resistivity andesite rocks (4.5 × 104–1.7 × 105 Ωm). These findings correlated well with the geological map. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
