| Autor: |
Muhammad Abdul Kadir, Adrian J. Wilson, K. Siddique-e Rabbani |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Frontiers in Electronics, Vol 2 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2673-5857 |
| DOI: |
10.3389/felec.2021.791016 |
| Popis: |
Monitoring of anatomical structures and physiological processes by electrical impedance has attracted scientists as it is noninvasive, nonionizing and the instrumentation is relatively simple. Focused Impedance Method (FIM) is attractive in this context, as it has enhanced sensitivity at the central region directly beneath the electrode configuration minimizing contribution from neighboring regions. FIM essentially adds or averages two concentric and orthogonal combinations of conventional Tetrapolar Impedance Measurements (TPIM) and has three versions with 4, 6, and 8 electrodes. This paper describes the design and testing of a multi-frequency FIM (MFFIM) system capable of measuring all three versions of FIM at 8 frequencies in the range 10 kHz—1 MHz. A microcontroller based multi-frequency signal generator and a balanced Howland current source with high output impedance (476 kΩ at 10 kHz and 58.3 kΩ at 1 MHz) were implemented for driving currents into biological tissues with an error 45 frames per second which was deemed adequate for noninvasive real-time impedance measurements on biological tissues. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
