Specificity of strength calculation for glued-in steel rods in LVL with unidirectional veneer
Autor: | Andrii Bidakov, Evhenyi Raspopov, Oksana Pustovoitova |
---|---|
Jazyk: | English<br />Ukrainian |
Rok vydání: | 2018 |
Předmět: | |
Zdroj: | Збірник наукових праць: Серія: Галузеве машинобудування, будівництво, Vol 2, Iss 51, Pp 196-201 (2018) |
Druh dokumentu: | article |
ISSN: | 2409-9074 2518-1106 |
DOI: | 10.26906/znp.2018.51.1315 |
Popis: | Design of joints of LVL elements with glued-in steel rods and metal connectors is considered as semi-rigid connection and requires taking of account the compliance. A comparative analysis of the test results of the beams with a metal connector and glued-in steel rods as well as solid beams is made in the paper. Design method of glued-in rods in LVL is proposed and taken into account failure mode. It allows reducing the distance between the axes of the rods as well as the distance from the rod axіs to the edges in the cross section of the beam and increasing the joint strength. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |