| Autor: |
Sun Yangyang, Chang Hui, Fang Zhigang, Dong Yuecheng, Dan Zhenhua, Guo Yanhua, Zhou Lian |
| Jazyk: |
English<br />French |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
MATEC Web of Conferences, Vol 321, p 11029 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2261-236X |
| DOI: |
10.1051/matecconf/202032111029 |
| Popis: |
Microstructure evolution and mechanical properties of low cost Ti-2Fe-0.1B alloy under different heat treatment were studied. Results indicated that two kinds of equiaxed microstructures with different characteristics were obtained in conventional and double annealing, and typical lamellar microstructure was obtained in β annealing. Tensile test results shown that as-received rolled alloy possess highest strength and plasticity simultaneously due to fine and entangled microstructure. Uniform equiaxed dimples were observed in microstructure, which revealed ductile fracture morphology. Key words: titanium alloy; microstructure; heat treatment; mechanical properties |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
