| Autor: |
Mudadla Dhananjaya, Devendra Ponuru, Thanikanti Sudhakar Babu, Belqasem Aljafari, Hassan Haes Alhelou |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
IEEE Access, Vol 10, Pp 19072-19082 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2169-3536 |
| DOI: |
10.1109/ACCESS.2022.3151128 |
| Popis: |
Multiport converters play a significant role in portable electronic and electric vehicle (EV) applications. In literature, different configurations of single-input multi-output (SIMO) converters are presented. Most of the SIMO converters generate the outputs with operating constraints on the duty ratio and charging of inductors. The cross-regulation problem is still a challenge in SIMO converters design. A SIMO topology is proposed in this study to overcome the limitations mentioned earlier. It can generate three different output voltages without constraint on the duty cycle and inductor currents (like $i_{L1} > i_{L2} > i_{L3} $ or $i_{L1} < i_{L2} < i_{L3}$ ). Cross regulation problems do not exist in the proposed topology, so the load voltage $V_{01}$ ( $V_{02}$ ) ( $V_{03}$ ) is not affected by the variation of output current $i_{03}$ ( $i_{02}$ ) ( $i_{01}$ ). The loads are isolated from each other during control. In the laboratory, a 200 W prototype circuit is developed; simulation and experimental results are validated. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
