Phase transformation and microstructure study of the as-cast Cu-rich Cu-Al-Mn ternary alloys
| Autor: | Holjevac-Grgurić T., Manasijević D., Kožuh S., Ivanić I., Balanović Lj., Anžel I., Kosec B., Bizjak M., Knežević M., Gojić M. |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | Journal of Mining and Metallurgy. Section B: Metallurgy, Vol 53, Iss 3, Pp 413-422 (2017) |
| Druh dokumentu: | article |
| ISSN: | 1450-5339 2217-7175 |
| DOI: | 10.2298/JMMB170809039H |
| Popis: | Four Cu-rich alloys from the ternary Cu-Al-Mn system were prepared in the electric-arc furnace and casted in cylindrical moulds with dimensions: f=8 mm and length 12 mm. Microstructural investigations of the prepared samples were performed by using optical microscopy (OM) and scanning electron microscopy, equipped by energy dispersive spectroscopy (SEM-EDS). Assignation of crystalline phases was confirmed by XRD analysis. Phase transition temperatures were determined using simultaneous thermal analyzer STA DSC/TG. Phase equilibria calculation of the ternary Cu-Al-Mn system was performed using optimized thermodynamic parameters from literature. Microstructure and phase transitions of the prepared as-cast alloys were investigated and experimental results were compared with the results of thermodynamic calculations. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|